Open the app

Bulkhead Workshop › Land Rover models › Land Rover Discovery 2 Td5 › Workshop guide › Fuel filter change & bleed

Land Rover Discovery 2 Td5: fuel filter change & bleed

Fuel & air · Discovery 2 (1998–2004) · 1998–2004

How often: every 24,000 mi or 2 yrs, whichever comes first. Water and dirt destroy injection pumps and injectors.

Work safely: support the vehicle on axle stands, never a jack alone; let it cool first. Check figures against your workshop manual. You do this work at your own risk.

Parts
  • Fuel filter element (with sealing rings) ESR4686
  • Clean diesel to pre-fill
Tools
  • Filter wrench
  • Rags
  • Container

Step by step

  1. Clean around the filter head. Unscrew the filter and catch the diesel.
  2. Oil or wet the new seal with diesel. Fill the new filter with clean diesel if you can, then fit it hand tight.
  3. Bleed: open the bleed screw on the filter head and operate the lift-pump priming lever (or hand primer) until fuel flows without bubbles. Close it.
  4. Crank the engine in short bursts. If it will not start, bleed at the injection pump bleed screw as your manual describes.
  5. Check for leaks with the engine running.

More Land Rover Discovery 2 Td5 servicing

Track your own Land Rover

Add your vehicle to Bulkhead Workshop to see what is due now, tick off jobs as you go, keep a service history and order the parts in one basket. It is free and saved in your own browser.

Open Bulkhead Workshop