Bulkhead Workshop › Land Rover models › Land Rover Defender 200Tdi › Specs & manuals
Land Rover Defender 200Tdi specs and manuals
Defender (1990–2016) · 1990–1994
Model data
| Built | 1990–1994 |
|---|---|
| Engine | 2.5 L 200Tdi turbodiesel I4, 107 hp, 195 lbf ft (264 Nm) |
| Gearbox & 4WD | 5-speed LT77 with LT230 transfer box |
| Wheelbases | 90 · 110 · 130 |
| Notes | Defender name from the 1991 model year (late 1990). |
| Wheelbase (mm) | 90: 2360 · 110: 2794 · 130: 3226 |
| Overall length | 90: 3722–3883 mm · 110: 4438–4631 mm · 130: 5132 mm |
| Width / track | 1790 mm / 1486 mm |
| Wading depth | 500 mm |
| Gross vehicle weight | 90: 2400–2550 kg · 110: 2950–3050 kg · heavy-duty 110/130: 3500 kg |
| Towing (on-road) | Unbraked 750 kg · over-run brakes 3500 kg · nose weight 150 kg |
Fluids & capacities
| Engine oil | 15W-40 mineral, API CH or better (10W-40 below −10 °C) |
|---|---|
| Oil capacity | ≈6.65–6.7 L including filter |
| Coolant | ≈11.1 L, 50% IAT (blue) ethylene-glycol antifreeze |
| Air filter | Paper element |
| Main gearbox | LT77S 5-speed: ATF Dexron II/III, ≈2.2 L |
| Transfer box | LT230: 80W-90 (GL-4 recommended), 2.30 L |
| Differentials | 80W-90 (Castrol EPX): front 1.70 L; rear 1.70 L (Rover axle, 90) or 2.26 L (Salisbury, 110/130) |
| Swivel housings | EP90, ≈0.35 L each side |
| Steering | Power steering: Dexron III ATF |
| Brakes | DOT4, minimum boiling point 260 °C |
| Clutch hydraulics | DOT4 (separate reservoir) |
Settings & torque figures
| Valve clearances | 0.20 mm (0.008 in), inlet and exhaust; rule of nine |
|---|---|
| Timing belt interval | 60,000 mi / 5 years (halve it for dusty use or regular deep wading) |
| Wheel nut torque | Alloy 130 Nm (96 lbf ft) · steel 108 Nm (80 lbf ft) · heavy-duty 170 Nm (125 lbf ft) |
| Tyre pressures (handbook) | 90: front 29 / rear 38 psi · 110: front 29 / rear 49 psi (110 Station Wagon 33/49, 65 rear fully laden) · 130: front 45 / rear 66 psi |
| Grease nipples | NLGI-2 lithium-based grease |
| Fuel tank | 90: 60 L · 110/130: 75 L (Td5 handbook) |
Service part numbers
| Rear crankshaft seal | ERR2532 |
|---|---|
| Flywheel housing gasket (early 200Tdi) | ERR1440 |
Sources for this model
Workshop manuals
Haynes and Land Rover don't offer a way for other sites to read their manuals directly. Keep your manual open alongside this page, and when you're stuck, photograph the relevant page and add it to a diagnosis so the AI can read it with your vehicle's details.
HaynesPrinted and online manuals for most Land Rover models
Brooklands BooksReprints of the official Land Rover workshop manuals and parts catalogues
Paddock SparesParts catalogue with exploded diagrams by model
LR4x4 forumSeries, Ninety/One Ten and Defender technical sections
Defender2.netDefender-focused technical forum
Track your own Land Rover
Add your vehicle to Bulkhead Workshop to see what is due now, tick off jobs as you go, keep a service history and order the parts in one basket. It is free and saved in your own browser.
Open Bulkhead Workshop