Open the app

Bulkhead Workshop › Land Rover models › Land Rover Discovery 1 200Tdi › Workshop guide › Check swivel housings & seals

Land Rover Discovery 1 200Tdi: check swivel housings & seals

Axles · Discovery 1 (1989–98) · 1989–1994

How often: every 12,000 mi or year, whichever comes first. Pitted swivel balls destroy seals and let grit into the bearings.

Swivel housingsEP90, ≈0.35 L each side; later vehicles one-shot grease

Work safely: support the vehicle on axle stands, never a jack alone; let it cool first. Check figures against your workshop manual. You do this work at your own risk.

Parts
  • Swivel lubricant (EP90, ≈0.35 L each side; later vehicles one-shot grease)
Tools
  • Spanners

Step by step

  1. Check each swivel ball for pitting, rust and leaks.
  2. EP90 swivels: check the level plug and top up. One-shot grease swivels: no routine top-up, but check for leaks and grease weeping from the seal.
  3. Check the CV joint for clicking on full lock.

More Land Rover Discovery 1 200Tdi servicing

Track your own Land Rover

Add your vehicle to Bulkhead Workshop to see what is due now, tick off jobs as you go, keep a service history and order the parts in one basket. It is free and saved in your own browser.

Open Bulkhead Workshop