Bulkhead Workshop › Land Rover models › Range Rover Classic 3.5 / 3.9 / 4.2 V8 fuel injection › Workshop guide › Brake & clutch fluid change

Range Rover Classic 3.5 / 3.9 / 4.2 V8 fuel injection: brake & clutch fluid change

Brakes · Range Rover Classic (1970–96) · 1985–1996

How often: every 2 yrs. Brake fluid absorbs water. Wet fluid boils under hard braking and rusts the cylinders from inside.

Brakes	DOT4, minimum boiling point 260 °C
Clutch hydraulics	DOT4 (shares or has its own reservoir; check yours)

Work safely: support the vehicle on axle stands, never a jack alone; let it cool first. Check figures against your workshop manual. You do this work at your own risk.

Parts

Brake fluid (DOT4, minimum boiling point 260 °C; ≈1 L)
Clutch fluid (DOT4 (shares or has its own reservoir; check yours))

Tools

Bleed tube & bottle
Brake bleed spanner
Helper

Step by step

Bleed the brakes in the order your manual gives (ABS models have a specific order).
Keep the reservoir topped up so no air gets in.
Bleed the clutch slave cylinder.
Check the pedal is firm before driving.

More Range Rover Classic 3.5 / 3.9 / 4.2 V8 fuel injection servicing

Engine oil & filter change every 6,000 mi or 6 months
Air filter element every 12,000 mi or year
Plugs, leads & ignition timing every 12,000 mi or year
Fuel injection checks & fuel filter every 12,000 mi or year
Fan / auxiliary belt check every 12,000 mi or year
Coolant drain, flush & refill every 2 yrs
Grease propshafts every 6,000 mi or 6 months
Check swivel housings & seals every 12,000 mi or year
Check gearbox, transfer & axle oil levels every 12,000 mi or year
Change gearbox & transfer box oil every 24,000 mi or 2 yrs
Change front & rear axle oil every 24,000 mi or 2 yrs
Steering & power steering check every 12,000 mi or year
Inspect pads, discs & brake hoses every 12,000 mi or year
Adjust transmission handbrake every 12,000 mi or year
Suspension bushes, arms & dampers every 12,000 mi or year
Wheel bearings & hub seals every 24,000 mi or 2 yrs
Automatic gearbox fluid & filter change every 24,000 mi or 2 yrs
Borg Warner transfer box & viscous coupling check every 24,000 mi or 2 yrs
Chassis & bulkhead inspection, rust-proofing every year
Annual safety inspection every year
Monthly walk-round checks every month

Track your own Land Rover

Add your vehicle to Bulkhead Workshop to see what is due now, tick off jobs as you go, keep a service history and order the parts in one basket. It is free and saved in your own browser.

Open Bulkhead Workshop