Bulkhead Workshop › Land Rover models › Land Rover Series I 2.0 diesel › Workshop guide › Inspect brake shoes, cylinders & hoses

Land Rover Series I 2.0 diesel: inspect brake shoes, cylinders & hoses

Brakes · Series I (1948–58) · 1957–1958

How often: every 12,000 mi or year, whichever comes first. Seized or leaking wheel cylinders are common on vehicles that sit for long periods.

Work safely: support the vehicle on axle stands, never a jack alone; let it cool first. Check figures against your workshop manual. You do this work at your own risk.

Parts

• Brake shoes (axle set, if worn)
• Wheel cylinders (if leaking)
• Flexible brake hoses (if cracked)

Tools

• Jack & axle stands
• Brake cleaner
• Dust mask

Step by step

1. Remove each drum. Do not blow the dust about; wipe with brake cleaner.
2. Check lining thickness and that linings are not oily.
3. Peel back the wheel cylinder boots. Fluid behind them means a leak; replace the cylinder.
4. Check every flexible hose for cracks and bulges, and the steel pipes for rust under the clips.

More Land Rover Series I 2.0 diesel servicing