Land Rover Series III 2.25 diesel: injector test & service
Fuel & air · Series III (1971–85) · 1971–1985
How often: every 24,000 mi or 2 yrs, whichever comes first. Worn injectors cause smoke, knocking and hard starting.
Work safely: support the vehicle on axle stands, never a jack alone; let it cool first. Check figures against your workshop manual. You do this work at your own risk.
Parts
4 × Injector washers & seals
4 × Injector test & reset (specialist, if needed) (specialist)
Tools
Spanners
Injector puller if seized
Step by step
Clean around each injector before you remove it.
Remove the injectors and send them to a diesel specialist to test spray pattern and set the opening pressure.
Refit with new copper washers and heat-shield seals. Bleed the system and check for leaks.
More Land Rover Series III 2.25 diesel servicing
Track your own Land Rover
Add your vehicle to Bulkhead Workshop to see what is due now, tick off jobs as you go, keep a service history and order the parts in one basket. It is free and saved in your own browser.