Open the app

Bulkhead Workshop › Land Rover models › Land Rover Series III 2.25 petrol

Land Rover Series III 2.25 petrol maintenance

Series III (1971–85) · 1971–1985

Five-main-bearing crankshaft from 1980. Axle driving splines increased from 10 to 24 in 1982. About 440,000 Series III built 1971–85. Built 1971–1985, 2.25 L petrol I4, 73 hp; compression raised from 7:1 to 8:1, 4-speed, the first Land Rover with synchromesh on all forward gears; 2-speed transfer box.

Service schedule

Every routine job for a Land Rover Series III 2.25 petrol with its normal interval, whichever comes first. Tap a job for the step-by-step guide, parts and tools.

JobSystemEvery
Engine oil & filter changeEngine3,000 mi / 6 months
Clean oil-bath air cleanerFuel & air6,000 mi / 1 yr
Points, plugs & ignition timingIgnition6,000 mi / 1 yr
Check & adjust valve clearancesEngine12,000 mi / 1 yr
Carburettor & fuel pump serviceFuel & air6,000 mi / 1 yr
Fan / auxiliary belt checkCooling6,000 mi / 1 yr
Coolant drain, flush & refillCooling2 yrs
Grease propshafts & nipplesDriveline3,000 mi / 6 months
Check swivel housing oil & sealsAxles6,000 mi / 6 months
Change swivel housing oilAxles12,000 mi / 1 yr
Check gearbox, transfer & axle oil levelsTransmission6,000 mi / 6 months
Change gearbox & transfer box oilTransmission12,000 mi / 1 yr
Change front & rear axle oilAxles12,000 mi / 1 yr
Steering box, relay & joints checkSteering6,000 mi / 1 yr
Adjust drum brakes & handbrakeBrakes6,000 mi / 6 months
Inspect brake shoes, cylinders & hosesBrakes12,000 mi / 1 yr
Brake & clutch fluid changeBrakes2 yrs
Leaf springs, U-bolts & shacklesSuspension12,000 mi / 1 yr
Wheel bearing play checkAxles12,000 mi / 1 yr
Chassis & bulkhead inspection, rust-proofingBody & chassis1 yr
Annual safety inspectionSafety1 yr
Monthly walk-round checksSafetymonthly

Track your own Land Rover

Add your vehicle to Bulkhead Workshop to see what is due now, tick off jobs as you go, keep a service history and order the parts in one basket. It is free and saved in your own browser.

Open Bulkhead Workshop