Open the app

Bulkhead Workshop › Land Rover models › Land Rover Series III 2.6 six-cylinder petrol › Workshop guide › Check gearbox, transfer & axle oil levels

Land Rover Series III 2.6 six-cylinder petrol: check gearbox, transfer & axle oil levels

Transmission · Series III (1971–85) · 1971–1980

How often: every 6,000 mi or 6 months, whichever comes first. A Series drivetrain can lose oil slowly from every seal. Running low wears gears quickly.

Main gearbox90W or 85W-90 GL-4, ≈1.4 L (1½ US qt). Avoid GL-5: its additives attack the bronze bushes
Transfer box90W or 85W-90 GL-4, ≈2.6 L (2¾ US qt)
Differentials90W or 85W-90 GL-4: Rover type ≈1.7 L (1¾ US qt) each; Salisbury rear ≈2.8 L (3 US qt); ENV rear ≈1.2 L, front ≈1.6 L

Work safely: support the vehicle on axle stands, never a jack alone; let it cool first. Check figures against your workshop manual. You do this work at your own risk.

Parts
  • EP90 gear oil top-up
Tools
  • Spanners
  • Oil pump

Step by step

  1. Park level. Remove the level plugs on the gearbox, transfer box, and front and rear differentials in turn.
  2. Oil should reach the bottom of each level hole. Top up as needed.
  3. Note any box that needs a lot of oil; find the leak (output seals, gasket, breather).

More Land Rover Series III 2.6 six-cylinder petrol servicing

Track your own Land Rover

Add your vehicle to Bulkhead Workshop to see what is due now, tick off jobs as you go, keep a service history and order the parts in one basket. It is free and saved in your own browser.

Open Bulkhead Workshop